Snack Attack Vending LLC is offering a Picker Cup Metal Cam for the Dixie Narco Bev Max 4 / 3800 & 5800 Vending Machine. The part# is CR101208. This cam wears out with heavy use and needs to be replace every few years along with Y homing switch (in another listing). This Cam is brand new from factory.
This is 10 selection buttons used on different vending machines including live display vending machines. Royal 650 models and Dixie Narco 501E and 276E live display models. Button backed with 60 day warranty. Easy to install. Best value on Ebay.
Snack Attack Vending LLC is offering a Dixie Narco 276E, 501E, 522E, 600E Delivery Door w / Trim. The door w/trim measures 12 3/8″ x 9 1/4″. This delivery door is brand new.Note: The locking tab that clips on the back side is not included.
Snack Attack Vending LLC is offering a Key Pad to Controller Harness Cable for models 2145, 3561 & 5591 Dixie Bev Max bottle dropper. The part# is DIX80491369051. The black female 10 pin connection connects to key pad and the white female 10 pin connection connects to board. The pic of Key Pad is for reference only. This Key Pad harness is brand new.
Snack Attack Vending LLC is offering (4) Dixie Narco “E” Series Double Column Plastic “CAN” Shims. This is for the Dixie Narco drink vending machine models 501E, 522E & 600E. You will need (4) shims on each side of column if vending 12oz cans (Total of 8). The wider part of shim installs to the rear. These Can Shims are brand new from factory.
Offering a Dixie Narco 276E, 501E, 522E, 600E Coin Chute 7.5″. This coin chute will fit on other Dixie models as well. Coin chute mounts by (2) screws not included. This coin chute is brand new.
Snack Attack Vending LLC is offering a Dixie Narco 276E Single Column “CAN” Shim Kit. This is for the Dixie Narco drink vending machine models 276E & 276HVV. The kit consists of (7) single column metal shims. No Rotor Rods are needed or included. This Can Shim Kit is brand new from factory.Single Column Instructions:Power down machine before installing shims. Start by adjusting the single brown vend motor cam discs. Lightly pull disc tab towards you and turn disc clockwise to #1 hole snaps in. You should have 3 notches on disc for 3 deep cans. Take springs off “sold out” flappers above vend motor. Power machine up and pull out white door button located between coin mech & bill validator. This will reset vend motor cams. Now vend each single column brown vend motor so that the rotor cup is in the right, 3:00 o’clock position. This will allow you an inch gap to take out metal ” bottle” shims and replace with “can” shims. The metal can shim rests on a metal rod front of machine and rear. Put a 12 pack of can soda in each column and test vend. 1st couple of vends cans will not drop.
Plug lock comes with 2 keys. All locks are keyed the same. Every key will fit every lock. You will receive 1 vending plug locks and 2 keys that fit any of the tubular plug locks. Keys are retaining, they stay in the lock when unlocked These locks are made of Zinc Alloy with chrome finish. They will fit most vending machines with T handles. If you need new vending lock for Coke, Pepsi, Combo beverage/snack vending machines, these locks are perfect. This vending plug lock works on most vending machines for Dixie, Narco, Vendo, National, Rowe, AP, USI.
Snack Attack Vending LLC is offering a Nine Selection Membrane for the Dixie Narco 501E & 600E drink vending machine. If you are getting a “SS” 1 – 9 error when pushing blue mode button than selection membrane needs replaced. This membrane is brand new from factory.
Snack Attack Vending LLC is offering a T – Handle Complete Assembly with #1452 Lock & 2 Keys for the Dixie Narco “E” series soda vending machines including 276E, 501E, 522E & 600E and other brand machines. T – handles tend to wear out from opening and closing machine door. From the threaded shank to closed postion t – handle measures 8″. This T – handle is brand new from factory.
